TEKTRONIX P6131 Passive Probe 10X

( Brand: Tektronix ), ( Manufacturer Part Number: P6131 ), ( Part Type: Probe ), ( Country/region Of Manufacture: United States )

Review TEKTRONIX 10x Passive

The P6131 Tektronix 10x Passive Probe is a versatile and high-performance test accessory designed for use with oscilloscopes. This probe features a 10:1 passive attenuation ratio, which allows it to handle signals up to 10 times higher than the maximum input of the oscilloscope, without overloading it.

The P6131 is equipped with a 10x multiplier, which provides a 10:1 voltage division ratio, allowing it to measure signals in the range of 10 mV to 1 V RMS. This makes it ideal for measuring low-level signals, such as those found in digital logic circuits, as well as higher-level signals in power supplies and other applications.

The probe features a high-quality, gold-plated tip, which provides excellent electrical contact and reduces the likelihood of signal degradation due to oxidation or contamination. The tip is also designed to be robust and durable, with a rubber boot that protects it from damage during use.

The P6131 Tektronix 10x Passive Probe is also equipped with a 1 M input impedance, which helps to minimize loading effects on the circuit under test. This ensures that the probe has minimal impact on the signal being measured, allowing for accurate and reliable measurements.

The probe is also equipped with a ground clip, which allows for easy and secure grounding of the circuit under test. The clip is adjustable and can be moved along the probe shaft to allow for easy access to hard-to-reach ground points.

Overall, the P6131 Tektronix 10x Passive Probe is a high-performance and versatile test accessory that is ideal for a wide range of applications. Its 10:1 attenuation ratio, high-quality gold-plated tip, and 1 M input impedance make it a reliable and accurate tool for measuring low-level signals in digital logic circuits, power supplies, and other applications. The adjustable ground clip also makes it easy to use in a variety of different configurations.

1. High-quality construction: Tektronix is a reputable brand known for its durable and high-quality test and measurement instruments. The P6131 probe is no exception, as it is built to last and withstand rigorous use in a lab environment.

2. High bandwidth: The probe has a bandwidth of up to 1 GHz, which allows it to capture fast-changing signals without distortion. This makes it ideal for analyzing digital signals, power electronics, and other high-frequency applications.

3. Wide frequency response: The probe has a frequency response of DC to 1 GHz, which means it can measure a wide range of signals, from DC to high-frequency signals.

4. 10x passive attenuation: The probe provides 10x passive attenuation, which allows it to measure signals with high voltage levels without damaging the oscilloscope. This feature is particularly useful for measuring high-power signals or signals with high impedance.

5. Easy to use: The probe is easy to use and requires no calibration, as it uses a passive design that does not rely on any internal electronics.

1. Expensive: The probe is relatively expensive compared to other passive probes on the market. This may be a deterrent for some buyers who are looking for a more affordable solution.

2. Limited functionality: The probe is a passive probe, which means it does not have any active features such as built-in filters or amplifiers. This may limit its usefulness in certain applications where these features are required.

3. Limited compatibility: The probe may not be compatible with all oscilloscopes, as it requires a specific BNC connection. This may be a consideration if you have an older oscilloscope that does not have this type of connection.

The P6131 Tektronix 10x Passive Probe is a high-quality passive probe that offers excellent performance in terms of bandwidth, frequency response, and attenuation. It is well-built and easy to use, making it an excellent choice for engineers and technicians who need to measure high-frequency signals with high voltage levels. However, its high price and limited functionality may be a deterrent for some buyers.

If you are looking for a high-quality passive probe that can measure high-frequency signals with high voltage levels, the P6131 Tektronix 10x Passive Probe is a good option to consider. However, if you are looking for a more affordable solution or require active features such as filters or amplifiers, you may want to consider other options on the market. Ultimately, the best probe for you will depend on your specific needs and budget.

Details:

Also included is an accessory kit for probes. Brand new in the original Tektronix packaging 10x passive probe for 2400 series oscilloscopes.

part #: p6131 prices

• $19.95-$70.00

specifications comnavavioni:

• brand: Tektronix
• mpn: P6131
• part type: Probe
• country/region of manufacture: United States

Payments comnavavioni:

• PayPal

Offer comnavavioni:

• min. bid: $150.00
• best offer: false
• Sold: 0
• Started: November 2, 2018, 2:52 pm
• : true
• bids: 0
• quantity: 1

Ratings:

1. Great customer, paid quickly and was very pleasant to work with. 10-22-18
2. Amazing customer. 10-10-18
3. AWESOME buyer! Recommended!!!Thank you so much! Welcome here anytime!! 10-11-18
4. Good buyer, prompt payment, valued customer, highly recommended. 10-14-18
5. Good buyer, prompt payment, valued customer, highly recommended. 10-17-18

Seller comnavavioni:

• # feedbacks 11-02-18: 1027
• rating 11-02-18: 100.0%
• zipcode: 80631
• city: Greeley, Colorado

Returns comnavavioni:

• policy: no returns

Shipping comnavavioni:

• handling: 2 days
• type: Calculated

General comnavavioni:

• in stock: Yes
• condition: New
• Avionics > Transponders

Tektronix P6131 Is Similar To:

• J6501 Tektroniix Tektronix Ft-candles Probe (58.3% similar) ...(September 23rd, 2016)